Direct measurement of bed shear stress using adjustable shear plate over a wide range of Froude numbers

Jae Hyeon Park, Young Do Kim (Lead / Corresponding author), Yong Sung Park, Dong Gyu Jung

Research output: Contribution to journalArticle

Abstract

The objective of this study is to extend reliability and applicability of the advanced measuring device for bottom shear stress introduced in the previous paper (Park et al., 2016) so that it could be deployed in the field. The high-speed open-channel flume used for the previous study has been renovated to accommodate even higher flow velocity (up to 6 m s−1). Then we adapted a non-intrusive velocity field measurement technique to such challenging flow conditions of interest. The specific experimental conditions required high degree of adaptation and subsequent development of analysis technique. The experimental results are used to reliably estimate bottom shear stress which is then compared to the measured value using the shear plate. It is shown that the shear plate can be applied to wide range of flow conditions by adjusting elastic shear modulus of the restoring mechanism.

Original languageEnglish
Pages (from-to)122-127
Number of pages6
JournalFlow Measurement and Instrumentation
Volume65
Early online date26 Nov 2018
DOIs
Publication statusPublished - Mar 2019

Fingerprint

Froude number
Shear Stress
shear stress
Shear stress
beds
shear
Flow velocity
Range of data
Open Channel
Elastic moduli
Measurement Techniques
Velocity Field
Modulus
High Speed
flow velocity
velocity distribution
adjusting
high speed
Experimental Results
estimates

Keywords

  • Adjusting elastic shear modulus
  • Bottom shear stress
  • High-speed flume
  • Shear plate
  • Velocity field measurement

Cite this

Park, Jae Hyeon ; Kim, Young Do ; Park, Yong Sung ; Jung, Dong Gyu. / Direct measurement of bed shear stress using adjustable shear plate over a wide range of Froude numbers. In: Flow Measurement and Instrumentation. 2019 ; Vol. 65. pp. 122-127.
@article{dc91cb75e81b46b698b1f408e382b765,
title = "Direct measurement of bed shear stress using adjustable shear plate over a wide range of Froude numbers",
abstract = "The objective of this study is to extend reliability and applicability of the advanced measuring device for bottom shear stress introduced in the previous paper (Park et al., 2016) so that it could be deployed in the field. The high-speed open-channel flume used for the previous study has been renovated to accommodate even higher flow velocity (up to 6 m s−1). Then we adapted a non-intrusive velocity field measurement technique to such challenging flow conditions of interest. The specific experimental conditions required high degree of adaptation and subsequent development of analysis technique. The experimental results are used to reliably estimate bottom shear stress which is then compared to the measured value using the shear plate. It is shown that the shear plate can be applied to wide range of flow conditions by adjusting elastic shear modulus of the restoring mechanism.",
keywords = "Adjusting elastic shear modulus, Bottom shear stress, High-speed flume, Shear plate, Velocity field measurement",
author = "Park, {Jae Hyeon} and Kim, {Young Do} and Park, {Yong Sung} and Jung, {Dong Gyu}",
year = "2019",
month = "3",
doi = "10.1016/j.flowmeasinst.2018.11.018",
language = "English",
volume = "65",
pages = "122--127",
journal = "Flow Measurement and Instrumentation",
issn = "0955-5986",
publisher = "Elsevier",

}

Direct measurement of bed shear stress using adjustable shear plate over a wide range of Froude numbers. / Park, Jae Hyeon; Kim, Young Do (Lead / Corresponding author); Park, Yong Sung; Jung, Dong Gyu.

In: Flow Measurement and Instrumentation, Vol. 65, 03.2019, p. 122-127.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Direct measurement of bed shear stress using adjustable shear plate over a wide range of Froude numbers

AU - Park, Jae Hyeon

AU - Kim, Young Do

AU - Park, Yong Sung

AU - Jung, Dong Gyu

PY - 2019/3

Y1 - 2019/3

N2 - The objective of this study is to extend reliability and applicability of the advanced measuring device for bottom shear stress introduced in the previous paper (Park et al., 2016) so that it could be deployed in the field. The high-speed open-channel flume used for the previous study has been renovated to accommodate even higher flow velocity (up to 6 m s−1). Then we adapted a non-intrusive velocity field measurement technique to such challenging flow conditions of interest. The specific experimental conditions required high degree of adaptation and subsequent development of analysis technique. The experimental results are used to reliably estimate bottom shear stress which is then compared to the measured value using the shear plate. It is shown that the shear plate can be applied to wide range of flow conditions by adjusting elastic shear modulus of the restoring mechanism.

AB - The objective of this study is to extend reliability and applicability of the advanced measuring device for bottom shear stress introduced in the previous paper (Park et al., 2016) so that it could be deployed in the field. The high-speed open-channel flume used for the previous study has been renovated to accommodate even higher flow velocity (up to 6 m s−1). Then we adapted a non-intrusive velocity field measurement technique to such challenging flow conditions of interest. The specific experimental conditions required high degree of adaptation and subsequent development of analysis technique. The experimental results are used to reliably estimate bottom shear stress which is then compared to the measured value using the shear plate. It is shown that the shear plate can be applied to wide range of flow conditions by adjusting elastic shear modulus of the restoring mechanism.

KW - Adjusting elastic shear modulus

KW - Bottom shear stress

KW - High-speed flume

KW - Shear plate

KW - Velocity field measurement

UR - http://www.scopus.com/inward/record.url?scp=85057624910&partnerID=8YFLogxK

U2 - 10.1016/j.flowmeasinst.2018.11.018

DO - 10.1016/j.flowmeasinst.2018.11.018

M3 - Article

AN - SCOPUS:85057624910

VL - 65

SP - 122

EP - 127

JO - Flow Measurement and Instrumentation

JF - Flow Measurement and Instrumentation

SN - 0955-5986

ER -